The PUSH Blog
Install Gel Guides & Pro Shop Tips
Slip solution recipes, ceramic tint tactics, PPF troubleshooting, and honest comparisons — written for working installers.
May 15, 2026 · 6 min read
The Best Slip Solution for Ceramic Tint (2026 Guide)
Ceramic films are stiffer and less forgiving than dyed film. Here's how to choose a slip solution that lets you position the film without locking it down too early.
Read post →
May 20, 2026 · 5 min read
Why My PPF Has Fingers (and How to Stop Them)
Fingers — those long water trails that won't squeegee out of paint protection film — almost always come from the wrong slip ratio. Here's the fix.
Read post →
May 25, 2026 · 4 min read
PPF Slip Solution Recipe (Pro Shop Formula)
The exact slip and tack ratios used by high-volume PPF shops, plus what to substitute when you're out of concentrate.
Read post →
May 28, 2026 · 7 min read
Tint Install Troubleshooting Guide: Bubbles, Haze, Lift
Diagnose and fix the four most common tint install defects: water bubbles, contamination, edge lift, and silver patches.
Read post →
Jun 1, 2026 · 5 min read
Install Gel vs Rapid Tac: Side-by-Side Comparison
Honest comparison of PUSH Install Gel against Rapid Tac II for tint and PPF installers — slip, cost per gallon, residue.
Read post →
Jun 4, 2026 · 4 min read
How Much Install Gel Do I Need? (Per Car, Per Month)
Concrete usage numbers so you can order the right size: per-vehicle, per-week, and per-month for tint and PPF shops.
Read post →