Tint Install Gel
Window tint install gel that pushes contamination out — not into the film.
PUSH is a concentrated tint installation gel for professional window film installers. Pre-measured packets. Same clean mix every job. No soap residue, no fish-eyes, no edge lift.
- Works for ceramic, carbon, dyed & nano film
- Pre-measured — consistent across every install
- Pushes contamination clear of the film
- No fish-eyes, no fingering, no residue
Built for tint installers, not borrowed from a detail shop
Cleaner squeegee passes
Lubricated slip lets the film glide. Squeegee strokes push water and contamination out — not around.
No fish-eyes
Surfactant residue from soap is what causes fish-eyes. PUSH rinses clean and bonds tight.
Long-term adhesion
Adhesive locks down without trapped film, so tint stays put through years of heat cycling and washes.
Same mix, every time
Pre-measured concentrate means every installer in the shop is working with the exact same solution.
Adjust to taste
Lighter for slip, heavier for tack. Tune the bottle for your install style without rebuying product.
Sized for any shop
Single packets to try, 10-packs for daily installers, bulk refills for multi-bay shops.
Tint install gel — frequently asked questions
What is window tint installation gel?
Tint install gel is a concentrated slip solution mixed with water that lets installers slide window film into position, squeegee out water and contamination, and bond the adhesive cleanly to automotive glass. PUSH is a pH-balanced concentrated install gel built specifically for window tint installers.
How do you mix PUSH tint install gel?
Fill a clean 20–24 oz spray bottle with filtered water, add one pre-measured PUSH packet, and shake for a full 2 minutes. Adjust concentration to your preference — lighter for slip, heavier for tack solution on the film side.
Why not just use baby shampoo for tint installs?
Baby shampoo and dish soap leave behind surfactant residue that traps contamination, causes fish-eyes, and weakens the long-term adhesive bond. PUSH is engineered for film: it pushes contamination clear of the tint and rinses without residue.
Will PUSH cause fingers, edge lift, or contamination?
No. PUSH is formulated to release contamination instead of trapping it. Most installers report fewer fingers, cleaner edges, and faster bond-down compared to soap-and-water mixes.
Is one packet enough for a full vehicle tint?
One PUSH packet makes one full 20–24 oz spray bottle, which is enough slip solution for a standard sedan tint. Daily installers and shops doing multiple cars a day should use the 10-pack or bulk refill.
Does PUSH work for ceramic, dyed, and carbon window film?
Yes. PUSH is film-agnostic — it works for ceramic, nano-ceramic, carbon, dyed, metallic, and security films from all major manufacturers.
Can the same PUSH packet be used for PPF?
Yes. PUSH is one install system for both window tint and paint protection film. Same packet, both jobs.